Results 1 to 4 of 4
  1. #1
    FT Member
    Join Date
    May 2006
    Location
    Columbia Falls, Montana
    Posts
    66
    Thanks
    1
    Thanked 11 Times in 7 Posts

    Default Cyber 2 pre set editor for Cyber Twin amp

    Hello
    I found this program to control the Cyber Twin amp. It's like cyber commander, a midi controller, not to bad..
    I downloaded it and installed it and it did control my cyber twin se... It would talk to the amp and control it... but this program is for the cyber twin first edition..
    so there was a bunch of stuff missing... several fx's a couple of tone stacks, ie neo british and dyna-touch...

    here is the u-tube video of it and the url is in the description to download the program...

    you tube video.... https://www.youtube.com/watch?v=UtAjV9YCbiA

    web site for download.... http://hamanako-kankou.uzusionet.com...er2Editor.html

    It's in Japanese but the zip file is there so that's what I downloaded... unzip it into a folder and ran the exe file... it's called cyber2 editor exe

    My cyber twin is set to receive on Midi channel 1 and to send on Midi channel 1 so I set the editor to those channels and it seemed to work...

    Hope this helps.... Jake

  2. #2
    FT Member
    Join Date
    May 2006
    Location
    Columbia Falls, Montana
    Posts
    66
    Thanks
    1
    Thanked 11 Times in 7 Posts

    Default

    Hello

    Been playing around with this program for the past few hours... It probably works just fine on the cyber twin original... On the cyber twin se it will control the functions that are available but a lot of the fx's aren't there...14 of them that the se has but not the original so there not there... timber is missing 4 settings stuff like that... Also the program will talk to the amp but the SE can't talk to the program... So you can't load the players lounge from the SE... The program just shows the original players lounge so don't hit Tx to amp or it will over write 1-84 presets with the original factory presets... Found out the hard way but had a backup copy of all my custom presets...

    But all the reverbs are there and are all tweakable... the fx presets that are there are all tweakable with just a mouse click... same with tone stacks drive circuitry, pre and post distortion, speaker phase...
    it's all tweakable with the mouse, all knobs turn up and down with the mouse also... with the SE to save a preset you have to walk over and hit the save button on the amp... with the original cyber twin you can just hit write file to save a preset...

    The nice feature is you can see all the tweakable features the amp has to offer so you can dial in a nice sound... Example: to get a nice Sixties Fuzz sound the SE uses the Fuzz Fx preset with blackface tone stack and blackface drive 1 but the fuzz fx was to gainy for my taste but turn down the fuzz gain it lost all it's bite... cyber Twin original doesn't have the Fuzz FX preset so they got it by using the extreme drive setting with a modern tone stack.... now turn the amp gain down and it sounds really nice... the SE's fuzz effect you really have to tweak it to get it to sound right...

    so we'll keep playing around with it and see what else we can come up with...Jake

  3. #3
    FT Member
    Join Date
    Jul 2017
    Location
    CambridgeUK, French Countryside
    Posts
    27
    Thanks
    5
    Thanked 0 Times in 0 Posts

    Default

    very cool! I will check this out. I just purchased an SE to go with my first edition. thanks for sharing

  4. #4
    FT Member
    Join Date
    Jul 2017
    Location
    CambridgeUK, French Countryside
    Posts
    27
    Thanks
    5
    Thanked 0 Times in 0 Posts

    Default

    OK, I been diving into remote controlling Cyber Twins and Digitech GSP2101.
    I see, now, why General Cyber Systems folded..

    I am currently using TouchOSC ipad app to control all three devices (2101, CT FE and CT SE).
    Midi CCs are just the tip of the iceberg. TouchOSC supports SYSEX messaging. You can set up a couple of TouchOSC pages to control a huge range of CT functions using the 18-24 midi CCs and Sysex.

    With Sysex you can change tone stack, tone stack location, Drive Circuitry, Effects Types, Revrb Type, Reverb Timbre, Speaker Phase, Compressor, Noise Gate all without touching a dial or a button on the Cyber Twin. You'll have to educate yerself on some hex code, but the recipe is in the CT manual.

    So there isn't a huge need for Cyber Commander. That said, you'll require an ipad and either need a computer with audio/ midi interface or and ipad midi interface (Tascam one looks pretty cool and not too expensive).

 

 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The words Fender®, Telecaster®, Stratocaster® and other Fender-owned brands, and the associated headstock designs, are registered trademarks of the Fender Musical Instruments Corporation.
FenderTalk is an independent, member supported forum and is not affiliated in anyway with the Fender Musical Instruments Corporation.


GearTalk Network



IMPORTANT:Treat everyone here with respect, no matter how difficult! No sex, drug, political, religion or hate discussion permitted here.



©2000 - 2018, Jelsoft Enterprises Ltd.
© FenderTalk.com 2010 All rights reserved.
All times are GMT -5. The time now is 11:00 PM.
vBulletin 4.0 skin by CompleteVB