How many ofyou still have your Cyber Twin SE (or original) and favorite settings?

[oldnewt]

Some one posted years ago differnert presets for blues 57twins, 91 Clapton bulky etc. for c Uber twin se if any one can help thank you . Oldnewt

[zenken]

Some one posted years ago differnert presets for blues 57twins, 91 Clapton bulky etc. for c Uber twin se if any one can help thank you . Oldnewt

PM sent.

[JakeJ]

Here's My 57 Fender twin settings

1 "57 Fender Twin " =Preset Name ;
2 "Tweed" =Tone Stack ;
3 "Pre-Distortion" =Tone Position ;
4 "Standard Polarity" =Speaker Phase ;
5 "Tweed Tube 3" =Drive Circuitry ;
6 "Stereo Tape Echo" =Effect Type ;
7 "Arena" =Reverb Type ;
8 "Reverb Input Only" =Reverb Bypass ;
9 "Full Body" =Timbre Type ;
10 "Off" =Compressor Type ;
11 "Low" =Noise Gate Type ;
12 6.9 =Gain Value ;
13 6.3 =Volume Value ;
14 5.9 =Treble Value ;
15 4.0 =Middle Value ;
16 6.4 =Bass Value ;
17 6.4 =Presence Value ;
18 6.0 =Reverb Value ;
19 6.26 =Echo Out Level ;
20 375 =Echo Time (ms) ;
21 5.59 =Echo Feedback ;
22 2.41 =Wow&&Flutter ;
23 "3.96" =Echo Brightness ;
24 RAMP =Dly/Time Change ;
25 5.48 =Reverb Input ;
26 1.00 =Reverb Tone ;
27 5.48 =Reverb Time ;
28 5.48 =Reverb Diffusion ;
29 5.02 =Noise Gate Depth ;
30 OFF =Noise Gate ;
31 "Volume" =Expression Pedal ;
32 "Reverb Diffusion" =Cont. Controller ;

[Littlefloor]

I don't, Fender amps here are rare among rock & metal band, mostly Marshall, then Peavey, VOX...

[ctreitzell]

I just purchased a CT SE to go along with my first edition. They both sound pretty good to me. I see all my previous talk about using a midi controller....midi controller is the only way to use CT imo...my UC33 has been working great for that
I also purchased a G Lab LMS-1 switcher to feed 4 amps. I have Digitech GSP2101 sending program change messages to the G Lab LMS-1 and it is working great, too. I haven’t really dived into programming the SE yet...looking forward to that