Page 1 of 3 123 LastLast
Results 1 to 10 of 25
  1. #1
    FT Member
    Join Date
    May 2006
    Location
    Columbia Falls, Montana
    Posts
    63
    Thanks
    1
    Thanked 11 Times in 7 Posts

    Default Cyber Twin and Cyber Commander

    Hello

    I thought I would let everyone know there is a program out there now that will run your Cyber Twin amp from your computer... It's called Cyber Commander and it is amazing it opens up your Cyber Twin amp and all the settings right on your computer screen... From there you can tweak all the settings in real time... I have been using Cyber Commander for about a month now and I'm just starting to understand how great, Fenders Cyber Twin SE amps are... This amp is years ahead of any one else, once you understand whats going on in side and how easy it is to use.... I've had my CTse for 4 years and I'm finally able to use it to it's full potential... Fender did not do this amp justice with there factory presets, but with Cyber Commander you see how each preset is made and how easy it is to tweak it and get some great sounds.... The only time I touch my amp now is to turn it on, sync the master volume with my cyber foot controller, and adjust the trim, everything else is done on the computer screen... Just point and click on Cyber Commanders screen and it controls the amp, My Amp now sits 20 ft. away instead of 2 ft.

    There are tens of thousands of different amp combination's not to mention your able to tweak each effect and each reverb setting in real time... Once you start to understand how great an amp Fenders Cyber Twin is and there is litterly no end to the possibility's... you just shake your head and say WOW....

    Hope this helps all CT owners....Jake Johnson

  2. #2
    Fender Lover
    Join Date
    Aug 2005
    Location
    Plattsburgh, NY
    Age
    64
    Posts
    2,753
    Thanks
    0
    Thanked 8 Times in 8 Posts

    Default

    Quote Originally Posted by JakeJ View Post
    there is litterly no end to the possibility's
    How ironic.

  3. #3
    Fender Lover
    Join Date
    Mar 2007
    Location
    Tucson, AZ
    Posts
    2,820
    Thanks
    2
    Thanked 10 Times in 10 Posts

    Default

    That sounds great.....but you didn't say how much.....and can it core an apple? (where is this reference from?)
    Michael

  4. #4
    FT Member
    Join Date
    May 2006
    Location
    Columbia Falls, Montana
    Posts
    63
    Thanks
    1
    Thanked 11 Times in 7 Posts

    Default

    Quote Originally Posted by MrSpyderman View Post
    That sounds great.....but you didn't say how much.....and can it core an apple? (where is this reference from?)
    I got the program from General Cybersystems they have it for the Original Ct and the SE.... I paid 79.95 for it....

  5. #5
    Fenderfied
    Join Date
    Sep 2007
    Location
    Western NC
    Posts
    5,385
    Thanks
    31
    Thanked 108 Times in 100 Posts

    Default

    Thanks, man.... gotta try one!

    BTW... here's the link: http://www.generalcybersystems.com/GCSWebSite/Index.htm
    Last edited by badxmpl; 03-22-2009 at 11:46 AM.
    Bottle Rocket Scientist.....

  6. #6
    Fender Lover
    Join Date
    Sep 2006
    Location
    Illinois
    Posts
    1,277
    Thanks
    0
    Thanked 7 Times in 4 Posts

    Default

    Thanks for the info!
    Les Paul Traditional Pro
    PRS CE24
    Fender VG Strat
    Fender CyberTwin SE
    Marshall AVT150H

  7. #7
    FT Member
    Join Date
    May 2006
    Location
    Columbia Falls, Montana
    Posts
    63
    Thanks
    1
    Thanked 11 Times in 7 Posts

    Default

    Your Welcome

    Let us know how you like the program.... I'm still learning what the Cyber Twin SE is capable of....

  8. #8
    New Member
    Join Date
    Jul 2009
    Posts
    1
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default Connections

    I'm considering getting the software but my only problem so far is how exactly to connect it. How exactly did you do it? Any ideas?

  9. #9
    Fenderfied
    Join Date
    Sep 2007
    Location
    Western NC
    Posts
    5,385
    Thanks
    31
    Thanked 108 Times in 100 Posts

    Default

    Jumper cables?


    (actually don't know.... most likely a usb/midi interface??....)
    Never did buy one..... getting by just fine w/o....
    Bottle Rocket Scientist.....

  10. #10
    FT Member
    Join Date
    Aug 2009
    Posts
    12
    Thanks
    0
    Thanked 1 Time in 1 Post

    Default

    Hi All,

    Johnny here from General Cyber Systems, the folks that provide Cyber Commander (SE and CT versions).

    2 MIDI cables needed for Cyber Twin, 1 MIDI cable for foot controller + one UM-2G (USB to MIDI converter) from Roland is what you need.

    For those of you not familiar with Cyber Commander, it is a software that opens up the Cyber Twin like no other software. Visit the General Cyber Systems website, pick a copy of the manual and see if you like it.

    This software took us 2 years to develop and thoroughly shake out. The software is bug free. As for support, we always answer the mail and support. Every single customer problem solved to date (almost always faulty cabling or faulty MIDI drivers).

    Software is native on PCs, do not have a native MAC version at this time. However, we know that Cyber Commander works on MACS will Parallels software running XP & MAC must be Intel based.

    If you have questions, I'll do my best to answer.

    ciao,
    johnny.

 

 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The words Fender®, Telecaster®, Stratocaster® and other Fender-owned brands, and the associated headstock designs, are registered trademarks of the Fender Musical Instruments Corporation.
FenderTalk is an independent, member supported forum and is not affiliated in anyway with the Fender Musical Instruments Corporation.


GearTalk Network



IMPORTANT:Treat everyone here with respect, no matter how difficult! No sex, drug, political, religion or hate discussion permitted here.



©2000 - 2018, Jelsoft Enterprises Ltd.
© FenderTalk.com 2010 All rights reserved.
All times are GMT -5. The time now is 11:32 AM.
vBulletin 4.0 skin by CompleteVB